- Homepage
- Bioeconomy Research Institute
- Bioeconomy Research Centre of Excellence (BioTEC)
- Scientific equipment
Scientific equipment
Most recent equipment of BioTEC
This equipment was acquired using a grant by the Research Council of Lithuania and the Ministry of Education, Science and Sports of the Republic of Lithuania (Project ‘Development of the Bioeconomy Research Center of Excellence’ (BioTEC) No. S-A-UEI-23-14) under the Program ‘University Excellence Initiative’ (Nr. V-940).
Acquired in 2024
SimaPro Software
| Description | Research areas in BioTEC | Visuals and Related events |
| “SimaPro“ is a software tool for Life Cycle Assessment (LCA) and Environmental Footprinting. It helps users to assess the environmental impacts associated with the entire life cycle of a product or service – from raw material extraction through production, distribution, use and disposal. With features such as a comprehensive database, life cycle inventory modelling, impact assessment methods, sensitivity analysis and reporting capabilities, SimaPro is a valuable tool for analysing and improving the environmental sustainability of products and processes.
Specifications: |
“SimaPro“ enables agricultural engineers to perform comprehensive life cycle assessments (LCAs) of agricultural systems, allowing them to analyse environmental impacts, compare different approaches, optimise resource use and more. By providing comprehensive data and analysis tools, SimaPro helps scientists make informed decisions for sustainability in agriculture. | Seminaras apie programinės įrangos „SimaPro“ taikymo moksliniuose tyrimuose galimybes | VDU Žemės ūkio akademija |
N2O/H2O and CH4/CO2/H2O Trace Gas Analyzers
| Description | Research areas in BioTEC | Visuals and Related events |
N2O/H2O and CH4/CO2/H2O Trace Gas Analyzers:
Specifications: |
The LI-7820 N2O/H2O Trace Gas Analyzer offers high-precision nitrous oxide measurements in a low power, portable design—enabling it to easily integrate into survey and long-term soil flux systems.
The LI-7810 CH4/CO2/H2O Trace Gas Analyzer offers high performance methane measurements in a durable, portable design. This makes the LI-7810 a great fit for survey or long-term measurements of soil CH4 fluxes. |
Dujų dirvožemyje analizatorių LICOR pristatymas ir mokymai | VDU Žemės ūkio akademija |
YARA N sensor ALS II
| Description | Research areas in BioTEC | Visuals and Related events |
| The N-Sensor determines the nitrogen requirement by measuring the light reflection from the crops in an area of approximately 50 m2. Measurement results are recorded every second, and the system is programmed to operate at the same speed over the entire area. The principle of sensor technology used in agriculture is the typical light reflection curve of the above-ground part of the plant. The N-Sensor measures light reflectance in a specific wavelength range, which is related to crop chlorophyll content and biomass. The sensor calculates the actual uptake of nitrogen (N) by the crop. Optimum fertilization rates are calculated based on nitrogen absorption data and transmitted to the variable rate control panel of the spreader or sprayer, which adjusts the fertilizer rate accordingly.
Specifications: |
N-Sensor – an optical measuring device, mounted on the roof of the tractor, is designed to measure the amount of nitrogen in crops and to determine the nitrogen status at a given time, so that it is possible to ensure that an accurate and optimal fertilizer rate will be calculated for each individual area of the crop field. This technology has already become a benchmark for modern precision agriculture.
Yara N-sensor ALS 2 is used in the fields of the VMU Agriculture Academy Training Farm to develop scientific research, as well as to acquaint students with the equipment both in the laboratory and in the fields of cultivated plants. |
 |
Equipment for QYSEA FIFISH V6 EXPERT underwater drone
| Description | Research areas in BioTEC | Visuals and Related events |
|
500 ml water sampler – intended to collect water samples across different underwater environments up to the depth of 100m Mud Sampler – equipment is used to collect and retrieve a variety of underwater sediments. AR Ruler – utilizes augmented reality technology (AR) with laser scaling technology to accurately measure the sizes of underwater objects with high precision and ease. 2-Finger robotic arm –small but powerful robotic arm delivers a clamping and towing force of 100N, is capable of retrieving large and heavy objects and is beneficial across a wide range of applications. Additional equipment for service, data storage and displaying. |
Equipment is intended for comprehensive surveys of surface water bodies. It allows to take water and substrate samples of various surface water bodies, to inspect hydraulic structures, evaluate their condition and accurately measure any occurring damages. Innovative Virtual Reality (VR) and Augmented Reality (AR) technologies are implemented with these devices, which makes them immersive for educational purposes. | 
|
Research stand for aerobic and anaerobic processing of plant biomass and organic waste
| Description | Research areas in BioTEC | Visuals and Related events |
| The stand consists of:
15-liter reactors for aerobic and anaerobic processing of test materials with mechanical stirrers; Equipment technical specification (EN):UIT_BTP2_Biogas_test_plant_Product_Information.pdf |
The stand is designed to study, model and demonstrate the processes of aerobic and anaerobic processing of plant biomass and organic waste. Research on the biodegradation of biomass and organic waste is necessary for evaluating the potential of biogas and biomethane production, the efficiency of composting processes and the quality of the resulting products. |   |
Acquired in 2023
Laser scanning Trimble X7
| Description | Research areas in BioTEC | Visuals and Related events |
| High-speed 3D laser scanner with combined servo drive/scanning mirror, integrated HDR imaging, automatic calibration, survey-grade self-leveling and laser pointer.
Specifications: 022516-364D_Trimble X7_DS_A4_1020_LRsec.pdf
|
Develops of above-ground models of surfaces of natural and anthropogenic objects, which are necessary for the analysis of surfaces of various objects. May be used to model various objects outside and inside the premises. | 
|
Flagship drone platform Matrice 350 RTK
| Description | Research areas in BioTEC | Visuals and Related events |
| This next-generation drone platform features an all-new video transmission system and control experience, a more efficient battery system, and more comprehensive safety features, as well as robust payload and expansion capabilities. It is fully powered to inject innovative strength into any aerial operation.
Specifications: |
Implements tasks related to the field of land management and real estate valuation.
Conducts studies on the health and viability of various plants, assessing the state of vegetation according to the values of plants’ reflection. The LiDAR scanner is used to create various surface models and determine the height and structure of various objects, e.g. may generate models of the earth’s surface, determining the height of plantations and many more. |
|
Cole-Parmer® FF-200 Series Economical Flame Photometer
| Description | Research areas in BioTEC | Visuals and Related events |
| Used to carry out classical analyzes in the soil – i.e. to determine the concentration of mobile potassium (K2O) in the soil and to measure the concentration of Na, K in other objects under research.
Specifications: |
It depends on the physical properties of the soil how much nutrients necessary for plants accumulate in it and whether they have enough of them. This kind of research is needed in the daily work of scientists in the field of agronomy. |  |
Altair® EDEM™ Discrete Element Method (DEM) Software
| Description | Research areas in BioTEC | Visuals and Related events |
| Allows to model accurately the behavior of rocks, soil, gravel, grain, fertilizers and other elements, as well as their interaction with the equipment under various operating and process conditions. Allows to predict the flow of these substances and determine the risk of clogging, wear and damage to the crop.
Specifications: |
EDEM simulation provides engineers with crucial insight into how those materials will interact with their equipment during a range of operation and process conditions. |  |
LI-8100A Automated Soil CO2 Flux System
| Description | Research areas in BioTEC | Visuals and Related events |
| The device is a portable, automated soil gas flux system known as the LI-8100A, equipped with an 8100-103 chamber analyzer, manufactured by LI-COR Inc., USA. This system is designed to measure soil CO2 emissions, specifically the soil surface CO2 efflux, in units of micromoles per square meter per second (μmol m^-2 s^-1)..
Specifications: |
Integrated, simple to use, and modular by design, the LI-8100A Automated Soil CO2 Flux System allows researchers to design a setup from a variety of components, customized for their application and research needs. |
 |
